there is very few topic for this on the internet and some customer ask me this so i decide to write it down. the only useful information i can find for running HDSDR with usrp b210 is http://spench.net/r/USRP_Interfaces but it is still complicated and all it do is generate the usrp related files for

1. connection: my PA LNA typically is a integrated product. PA IN port connect to usrp TX port; PA OUT port connect to duplexer TX port; LNA OUT port connect to usrp RX port; LNA IN port connect to duplexer RX port; duplexer ANT port connect to antenna; reference picture below for the power cable a

just run: sudo apt-get install qt5-qmake sudo apt-get install qtbase5-dev sudo apt-get install pkg-config sudo apt-get install libqt5svg5-dev export QT_SELECT=qt5 git clone https://github.com/csete/gqrx.git cd gqrx git checkout v2.11.5 mkdir build cd build qmake ../gqrx.pro make sudo ./gqrx

first install uhd and gnuradio. you can reference this to install uhd and gnuradio: http://zhixun-wireless.top/install-uhd-and-gnuradio-on-ubuntu-1604 then install gr-osmocom. just run: git clone git://git.osmocom.org/gr-osmosdr cd gr-osmosdr/ git checkout gr3.7 mkdir build cd build/ cmake ../ make

download gnuradio for windows from: http://www.gcndevelopment.com/gnuradio/downloads.htm i use version 3.8 which is work fine for me. run the gnuradio install exe it will also install uhd automaticly. after installation finish you can see this in the windows Start Menu.    run USRP Sp

1. install matlab 2. choose install hardware support package like below 3. search "USRP", install usrp support package. after this you can open usrp example to run. for matlab version lower than R2017 may have this error "Fatal Alert: Protocol_version" during installing hardware support package. f

reference this http://zhixun-wireless.top/install-and-configure-openbts-with-b210-on-ubuntu-1604 install openbts first. after installing openbts then run: sudo apt-get install build-essential libtool libtalloc-dev libsctp-dev shtool autoconf automake git-core pkg-config make gcc gnutls-dev python-mi

1. install labview or labview NXG or labview Communications System Design Software. 2. Visit www.ni.com/info search keyword "usrpdriver", it will go to the page of usrp driver. download the driver. 3. install the usrp driver. using default for all configure during installation. after installation of

the instrunction of gps-sdr-sim can be found in its readme: https://github.com/osqzss/gps-sdr-sim however it did not tell how to use usrp b210 to send the generated gps signal. assumming you have generate gps signal file gpssim.bin and you have install uhd(reference http://www.zhixun-wireless.top/in

this article introduce install uhd and gnuradio on ubuntu 16.04 1. install uhd ubuntu 16.04 apt-get have uhd package but it is old version. if you are from China, I suggest you change apt-get source to other. I use 清华大学 source which work fine for me, open /etc/apt/sources.list and replace all the co

this article introduce install and configure srslte enb epc on ubuntu. 1. install the required package for srslte: sudo apt-get install cmake libfftw3-dev libmbedtls-dev libboost-program-options-dev libconfig++-dev libsctp-dev libuhd-dev libuhd003 uhd-host 2. download and compile srslte: git clone h

1. install openbts and uhd if you are from China, I suggest you change apt-get source to other. I use 清华大学 source which work fine for me, open /etc/apt/sources.list and replace all the content as below: # deb cdrom:[Ubuntu 16.04 LTS _Xenial Xerus_ - Release amd64 (20160420.1)]/ xenial main restricte